OD Φ 28mm Micro Vibration Motor

  • RS-380 4.8V 4800RPM 28mm small vibration motor
  • RS-380 4.8V 4800RPM 28mm small vibration motor
  • RS-380 4.8V 4800RPM 28mm small vibration motor
  • RS-380 4.8V 4800RPM 28mm small vibration motor
  • RS-380 4.8V 4800RPM 28mm small vibration motor
RS-380 4.8V 4800RPM 28mm small vibration motorRS-380 4.8V 4800RPM 28mm small vibration motorRS-380 4.8V 4800RPM 28mm small vibration motorRS-380 4.8V 4800RPM 28mm small vibration motorRS-380 4.8V 4800RPM 28mm small vibration motor

RS-380 4.8V 4800RPM 28mm small vibration motor

  • Model: RS-380-V
  • Brush: Carbon Brush
  • Voltage: custom
  • Speed:cutom
  • Product description:RS-380 4.8V 4800RPM 28mm small vibration motor | FoneAcc Motion, micro vibration motor vibration motor small vibration motor mini vibration motor coin vibration motor miniature vibration motor c
  • INQUIRY

RS-380 4.8V 4800RPM 28mm small vibration motor


1) This specification just applies toRS-380SH-25100-57VE DC motor to be supplied to you.
2)  We made this MOTOR SPECIFICATIPN is just for your conference. Please note that it is your responsi-
bility to ensure that the motor can satisfy the requirements of your application.
3) When defective performance is occurred mutual discussions shall be made in accordance with SPECIFI-
CATION FOR APPROVAL to resolve the matter.
4) If the sample confirmed but no stamp and return We will consider you Confirmed this sample and product
specification when issue order.


1 STANDARD Operating CONDITIONS:

1-1 Rated voltage 4.8V DC.
1-2 Rated load: g.cm (eccentric mass:8g)
1-3 Direction of rotation: CCW
1-4 Operating voltage range DC3.0-6.0VDC at motor terminals
1-5 Operating temperature humidity range: -10~50°C/5%~85%RH (No condensation of moisture)
1-6 Motor position: All position of protruded shaft


2 MEARSURING CONDITIOND:
2-1 Motor position Horizontal direction
2-2 Power supply regulated DC power supply assuring unquestionable
measuring
2-3 Environment temperature And relative humidity 10-30℃ & Ordinary Humidity.
If the judgment is questionable, Measurement is to be
made based on JIS Standard Testing Condition
(25±2℃, 65±5%).
2-4 Unless otherwise specified, rated voltage to be applied
2-5 Direction of rotation: CCW - when viewed from output shaft side.


3 ELECTRICAL CHARACTERISTICS:
3-1 No load speed: 4750 rpm±10%.
3-2 No load current: 0.25A max.
3-3 Rated load speed: 4450rpm±10%.
3-4 Rated load current: 0.6A max.
3-5 Starting voltage: 1.0V max. (No Load)
3-6 Stall current: 3.3A min.
3-7 Stall torque: 270g cm/min.
3-8 Insulation resistance 1 MΏ (min) DC 100V between motor terminal and
motor metal housing.
3-9 Reference characteristic curve see spec T.N.I.


4  MECHANICAL CHARACTERISTICS:
4-1 Dimension: as per the outline drawing
4-2 Appearance no remarkable deformation and/or superficial defects
4-3 Shaft end play: 0.05-0.55mm.
4-4 Shaft T.I.R 0.03mm(Max)at 2/3 of output shaft side and measured
by dial gauge.
4-5 Maximum Axial Load 15kg max Direction of static load and support of load as
shown bellow
4-6 Vibration To be set up with mutual consent.
4-7 65dB(A)max. Motor fixed to the sponge pad, the output
shaft horizontal. Under rated voltage Mechanical noise
under No-load at rated voltage .Noise analyzer the Probe
distance motor 30cm.(back ground noise to be 40dB max
4-8 Weight 77g approx.


5 LIFE TEST:
5-1 Continuously running 500Hours(min.)
5-2 Intermittent running TBA. Cycles(min.)
Test conditions:
Voltage 4.8V DC
Load by Fan load equivalent to 7g. cm .Rated load current 0.45A Approx
Environment 25±5℃/65%℃±20%RH
Operation mode the rated voltage, Rated load, Continuous operation
Life end defined as follows:2
1)When current is over±10% against the initial figure.
2)When speed is beyond±10%.against the initial figure.
3)When motor is unquestionable recognized as unusable.


6 STORAGE:
Storage Temperature:  -20℃~70℃.
Storage relative humidity: 5%~95%RH
Keep dry, avoid storing in high temperature, high humidity or corrosive gas environment.


7 ATTACHMENT:
Motor Outline Drawing & Characteristic Curve Drawing.
Outline of the motor:

Performance Curve:


~~~~~END~~~~~~~

CONTACT US

Contact: FoneAcc Motion Sales

Phone: +86-13923860676

Tel: +86-0755-8528 5605

Email:sales@foneacc.com

Add: Building A, No. 58 Qiaonan RD, Fuyong Street, Bao An District. Shenzhen, China

Scan QR Code in WeChatClose
二维码